Support Center
Troubleshooting, selection guide and technical resources for multi-rip saws, edging machines, sawmill production lines and blade sharpeners.
Troubleshooting
- Why does the multi-rip saw blade burn or turn blue, and how to fix it?
- The cut surface is rough with knife marks. What to do?
- Yield is low and the kerf is wide. How to improve?
- The machine vibrates heavily or makes unusual noise. What to do?
- How often should blades be sharpened, and what is daily maintenance?
- The grinder produces asymmetric tooth profiles. How to fix?
- Why is the multi-blade rip saw spindle so noisy?
- How do I deal with a multi-blade saw chain that breaks or stretches?
- Is a burnt multi-blade saw motor coil covered by warranty?
- The multi-blade saw will not feed or the contactor will not pull in - how to check?
- How do I fix a multi-blade saw that leaves timber uneven top and bottom?
All troubleshooting topics and fixes
Selection guide
- How to choose between a log multi-rip saw and a square-wood multi-rip saw?
- Light-duty or heavy-duty square-wood multi-rip saw?
- When do I need an edging or multi-rip machine?
- What blade material should I choose?
- Should I go for an automatic sawmill production line?
- How much does a multi-rip saw cost? Don't ask the price first — check these 5 specs
- How to choose a Fujian multi-rip saw factory? Check these 5 things on your site visit
- Multi-rip saw vs bandsaw: which one pays off for a small shop? Here's the math
- How long to cut logs? The order decides: choosing Yuanchuang log cut-off saws (MJD series)
- Uneven Panel Lengths Keep Getting Rejected? Choosing the YuanChuang Adjustable-Length Panel Cut-Off Saw (MJD100-400)
- Running Both Logs and Squares? Don't Buy Two Machines: Choosing a YuanChuang Combined Log/Square Multi-Rip Saw (MDY Series)
- Harder Isn't Tougher: Why Mixed Hardwood Chips Saw Teeth — How to Pick Toughness (YuanChuang 80CrV2 Alloy Saw Blade)
- Thin stock on a heavy machine burns power at idle: matching a light-duty square-timber multi-rip saw (Yuanchuang MJF10x25/30)
- Which Saw Blade Grinder Brand Is Good? 4 Points for Choosing a Blade Grinding Machine
- How to Choose a Wood Edging Saw: Selection Tips and Pitfalls to Avoid
- How to Choose a Square Timber Multi-Blade Saw Maker: 4 Things to Check Before Ordering
- Which Log Multi-Blade Saw Brand Is Good? 5 Hard Factors to Check Before Buying
- Rough Cut Done? Sliding Table Saw Takes Over Sizing: How to Pick the MJT Series
- Uneven Board Thickness? Sort Logs by Diameter First: Matching YuanChuang MDY Multi-Blade Saws to Log Caliber
- Cutting Square Timber on a Log Multi-Rip Saw? Why It Drifts, Wastes Material, and When to Switch — YuanChuang MJF Series
- Log Centering Matters: How Auto-Centering Multi-Blade Log Saws (Yuanchuang MDY Series) Recover More Yield
- Why Multi-Rip Saw Blades Are Accounted For per Set, Not per Piece: Four Accounts, Set Consistency and Spacer Rebuilds
- How to Choose a Multi-Blade Rip Saw: Fix the Material Form, Check Three Configurations, Then Cost the Whole Life
- Choosing a Multi-Rip Saw for Log Breakdown and Squaring: Horizontal vs Vertical, and Sizing by Log Diameter
- How to Improve Log Multi-Rip Saw Yield: Kerf, Blade Sharpness and Feeding
- Alloy Saw Blades & Accessories Selection Guide
Full selection guide
Technical resources
Specification charts, model comparison, manuals and articles
Contact us · Products