Automatic Saw Blade Sharpener: Technical Guide & Manuals
Fujian Yuanchuang Electromechanical Co., Ltd. (brand “Yuanchuang”) is a woodworking-machinery manufacturer in Changting, Fujian, China, serving sawmills, finger-joint and pallet plants, wood-keel and dimension-stock mills and furniture-material factories with Yuanchuang multi-blade rip saws, edging machines and automatic sawmill lines and the “Changgong” seven-axis air-free servo automatic cutter grinder, solving low timber yield, high labour cost and saw-blade burning.
7-axis servo auto tool-setting: enter blade diameter, tooth pitch and profile and it positions and calibrates itself — air-free, no manual angle setting, run-able after simple training. Operation manuals available for download.
Features
7-axis servo automatic tool-setting: enter blade diameter, tooth pitch and profile for auto positioning and calibration
Air-free, no manual wheel-angle adjustment — no reliance on veteran sharpeners
Ordinary or new operators can run it after simple training
Specifications
Power supply: single-phase 220V 50Hz
Blade diameter: Φ150–Φ600 mm
Power: 5.5 kW
Grinding speed: 1–8 teeth/min
Dimensions: L1120×W760×H1350 mm
Net weight: 480 kg
Grinding accuracy: ±0.05 mm
Troubleshooting
Asymmetric tooth profile: check that the alignment datum is zeroed, the wheel is not worn and feed parameters are consistent; re-calibrate the auto tool-setting, dress/replace the wheel and ensure concentric blade clamping.
Manual Downloads
Full operation manuals are provided (see the "Document Downloads" area at the bottom of this page):
CG-700CM Intelligent Grinder Operation Manual
CX-1570 7-axis Air-free Auto Tool-setting Sharpener Manual
Automatic Saw Blade Sharpener: Technical Guide & Manuals · All technical resources